Primary Profile

PENNECON ENERGY HYDRAULIC SYSTEMS

PENNECON ENERGY HYDRAULIC SYSTEMS

PENNECON ENERGY HYDRAULIC SYSTEMS

2 Maverick Pl.
Paradise, Newfoundland and Labrador
A1L 0H6

2 Maverick Pl.
Paradise, Newfoundland and Labrador
A1L 0H6

(709) 726-3490

(709) 726-3729

Click here

PENNECON ENERGY HYDRAULIC SYSTEMS

• Established for Thirty-Nine (39) years in the Atlantic Provinces and for thirteen (13) years in St John’s Newfoundland.
• Since 2003 PEHS has been a member of the Pennecon Group of companies, which expanded the in house capability by becoming part of a large industrial group, including:
- Offshore and Marine Electrical services.
- Field construction (Mechanical).
- Field construction (Civil).
- Field Construction (Electrical)
- Marine and offshore yard based fabrication.
- Marine base.
• Major Hydraulic Equipment distributor; PEHS carries the largest inventory of Hydraulic Products in Atlantic Canada.
We represent:
• Parker Hydraulics for whom we are a Hydraulic Technology Center for Newfoundland and for Nova Scotia.
• Parker Process filtration.
• Danfoss; fluid control products, controls and refrigeration products.
• Stauff; test equipment, valves, clamps and supports, hydraulic accessories and filtration.
• Pullmaster winches.
• Racor diesel, gas aviation fuel fitration and water separation products.
• Lantec winches.
• Ned-Deck Marine Davit Systems.
• Fast RSQ rescue craft.
• Caley Ocean Systems. We have distributed for and represented Caley Ocean Systems for twelve (12) years. Caley design, manufacture, install and operate handling systems for subsea packages.
• C C Jensen; hydraulic and lubrication off-line filtration and water separation products.
• Bifold Fluidpower hazardous area pneumatic and hydraulic control valves and systems.
• Dynex severe duty hydraulic pumps.
• Marshalsea hydraulics hazardous area control valve and water glycol and water, high-pressure pumps.
• Atos directional control valves.
• Palfinger Marine Cranes
• KYB rotary piston motors.
• We are experienced in handling “Turnkey “ projects in offshore, petro-chemical, marine and forestry markets, incorporating centralized hydraulic power systems, hydrostatic drives, deck machinery, pneumatic and mechanical systems, filtration systems, piping installations and integrated control systems.
• We provide non-welded piping system installations using Tube-Mac products and are an authorized distributor and authorized installer for these products. These products provide for a leak free start up and additionally reduce the timescale for flushing in the pre-commissioning process for lubrication and hydraulic systems.
www.tube-mac.com
• We provide integrated pipework precommissioning services comprising, chemical cleaning, retro-jetting, line pigging, pressure testing, hot oil flushing and onsite certification for piping systems.
• PEHS is the Atlantic Canadian representatives for Hydratight and all HSL technician staff are fully certified Hydratight bolting technicians.
www.hydratight.com
• We provide the complete range of DL Ricci on-site /In-place machining services without hotwork from our St John’s base with trained technicians available from St John’s or Dartmouth base locations.
www.dlricci.com
• We provide Engineering, Design, Commissioning and Maintenance services for clients.
• We provide the full range of Boyle Energy specialist pre-commissioning services through our St John’s Newfoundland base. This includes the specialist workscopes:
High pressure steam blows, Vapour Phase Cleaning, Froth
Flushing, Chemical Cleaning.
www.boyleenergy.com
More Information on PEHS is available on our website:
www.hydraulic-systems.com

Company Details

1973

50

Canada

Yes

213118 - Services to Oil and Gas Extraction

213119 - Other Support Activities for Mining
336611 - Ship Building and Repairing
417230 - Industrial Machinery, Equipment and Supplies Wholesaler-Distributors
811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

Manufacturer / Processor / Producer

$10,000,000 to $24,999,999

$500,000 to $999,999

Product / Service / Licensing

Product Name: Bifold Fluidpower
PEHS represents Bifold Fluidpower who supply speciality hazardous area rated stanless steel solenoid valves.
These valves are suitable for oil, water glycol and air operation.
Bifold fluidpower also provides a range of stainless steel instrumentation ball and needle valves and piping valves for severe service applications.

Product Name: Davit Systems
PEHS has availability of davit systems from Ned-deck davits.

Survival systems and deck equipment
• Slewing davits for rescue boat handling, life raft handling,
combined rescue boat / life raft / stores handling
• Hydraulic pivoting davits (A-frame type) for (fast) rescue boat
handling and daughter craft handling
• Life boat davits for marine and offshore applications
• Fender davits
• Yacht davits
• RHIB Recovery installations (aft entry)
• Custom made davit systems
• Combined marine and offshore cranes for cargo / rescue boat /
life raft handling
• Marine / Offshore training schools

Please see website below:

www.neddeckmarine.com

Product Name: DNV 2.9 Cylinder manufacture
Design and manufacture of hydraulic cylinders in accordance with the requirements of DNV 2.9 standard. Type approval from DNV is in place for this type of manufacture.

Product Name: FAST RSQ Fast Rescue Craft and workboats
Aluminum boats, GRP boats and RHIB's
• Wide range of standard (fast) rescue boats and daughter crafts. Fast RSQ
can provide clients with crafts to fulfill all their needs, subject to existing
line plans.
• Wide range of SOLAS approved outboard engines for maritime industry.

Please see the FAST RSQ website for details:

www.fastrsq.com

Product Name: Palfinger Marine Cranes
PEHS is the Eastern Canadian distributor for Palfinger Marine Cranes.
These cranes are available for up to 330 MT capacity and are available in the following configurations.
- Foldable Knuckle Boom Crane.
- Stiff Boom Crane.
- Telescopic Boom Crane.
- Heavy Duty Knuckle Boom Crane.
- Heavy Duty Foldable Cranes.
These cranes are available with man-riding capability, with radio remote control operation and with certification to any required class society, DNV, Lloyd's, ABS, Bureau Veritas, Transport Canada.

Please see details of this range of cranes on the Palfinger Marine Crane website.

www.palfingermarine.com

Product Name: Parker Hydraulic Technology Center
PEHS is a Parker Hydraulic Technology Ceneter for Eastern Canada and as such can provide the full range of Parker Hydraulic and Filtration products including.

- Pumps.
- Motors.
- Valves
- Accumulators
- Filtration, Hydraulic, Lubrication, Air, Fuel
- Racor diesel, oil and fuel filtration including water seperation products.
- Village Marine Tec, Reversew Osmosis Watermakers and Bilge water systems.
- Parker Process Filtration.
- Parker Nitrogen Generation Systems.

Please see website below:

www.parker.com

Product Name: Pullmaster & Lantec Winches
PEHS are the distributor for Pullmaster and Lantec winches. Additionally PEHS have access to the full TWG winch group product range.

Pull master and Lantec provide:

- Equal Speed Winches.
- Recovery Winches.
- Rapid Reverse Winches.
- API winches.
- Truck Winches.
- Capstans.
- Planetary Drives.

Capacity to 300,000 lb line pull.

Please see website:

www.team-twg.com

Product Name: Stauff Hydraulic Products
PEHS is a Stauff distributor for Eastern Canada providing the full range of Stauff products including:

- Pipe, Tube and Hose clamps and supports.
- Test equipment, Test Points and Test hoses.
- Diagnostic equipment, Analog and Digital Gauges, Radio Remote Gauges, Pressure Switches, Pressure Transmiters, Pressure and Temperature controllers, Hydraulic Testing Products, Flow Monitoring Products, Laser Particle Counters, Level switches and Transmitters.
- Filtration.
- Suction Stainers, Filler Breathers, Dessicant Breathers, Level Gauges, Accumulators.
- Valves, High pressure (To 10,000 psi), low pressure insizes from 1/8" to 5".

Service Name: Boyle Energy Specialist Pipework Pre-commissioning Services
We provide the full range of Boyle Energy specialist pre-commissioning services through our St John’s Newfoundland base. This includes the specialist workscopes:
High pressure steam blows, Vapour Phase Cleaning, Froth
Flushing, Chemical Cleaning.

Please see website below:

www.boyleenergy.com

Service Name: Design and manufacture of Hydraulic Power Units
Design and manufacture of HYdraulic Power Units.
These power units are provided either:
- Electric Drive.
- Diesel Drive.
- Gas drive.
- Air Drive.
The units are designed for applications in the marine, offshore and industrial sectors and are available marine deck rated or hazardous area rated, dependant upon the application.
The HPU assemblies can be provided complete with third party review for DNV, Lloyd's, ABS or Transport Canada.
HPU assemblies with capacities up to 600 HP available from previous design.
HPU assemblies are available in sectiuonal construction for retrofit into vessels or offshore installations.

Service Name: DL Ricci on-site / in situ machining
We provide the complete range of DL Ricci on-site /In-place machining services without hotwork from our St John’s base with trained technicians available from St John’s or Dartmouth base locations.

Please see website below:

www.dlricci.com

Service Name: Hydratight Bolting Solutions
PEHS is the Atlantic Canadian representatives for Hydratight and PEHS technician staff are fully certified Hydratight bolting technicians.
We can provide a full turnkey package of Bolting personnel, bolting equipment and certification for projects or provide Supervisors to supervise your workforce for project completion. Bolting equipment can be provided on rental only from our NL and NS inventories.

Please see website below:

www.hydratight.com

Service Name: Tube-Mac non-welded Piping Products
We provide non-welded piping system installations using Tube-Mac products and are an authorized distributor and authorized installer for these products. These products provide for a leak free start up and additionally reduce the timescale for flushing in the pre-commissioning process for lubrication and hydraulic systems.
These piping systems remove the requirement for NDE of welded joints making significant savings in installation costs as well as a much reduced man-hour requirement for joint completion over traditional welded joints.
Tube-Mac products are third party certified by, Lloyd's, DNV, ABS, Navsea.

Please see the website below:

www.tube-mac.com

FSC Code: 1940-Small Craft
2030-Deck Machinery
2090-Miscellaneous Ship and Marine Equipment
2520-Vehicular Power Transmission Components
3040-Miscellaneous Power Transmission Equipment
4610-Water Purification Equipment
4620-Water Distillation Equipment, Marine and Industrial
4710-Pipes and Tubes, Rigid
4720-Hose and Tubing, Flexible
4730-Fittings and Specialities: Hose, Pipe and Tube
4810-Valves, Powered
4820-Valves, Nonpowered
N000-Installation of Equipment

Technology Profile

Within our workshops or in the field if applicable Pennecon Energy Hydraulic Systems uses the following processes or equipment:
- Automated power honing.
- Hydrostatic test Equipment.
- Hot oil Flushing equipment with Binocular microscope or automatic counter for certification.
- Specialist flaring aor crimping equipment for non-welded piping installations.
- Test bed (300HP) for pump / motor testing.
- Enclosed hydrostatic test bay.

Market Profile


Alliances:

Industry Sector Market Interests:
Geographic Markets: Export Experience:

Sector Information


Classification Codes
Dun and Bradstreet Number:
246860659
CAGE Code:
38785
Plant Information:
Total Plant Size (Areas sq ft):
Newfoundland:
• 11,500 Sq Ft facilities.
• 3,500 Sq Ft offices.
• 25,000 Sq Ft laydown area.

Nova Scotia:
• 24,000 Sq Ft facility.
• 10,000 Sq Ft laydown area.



Distribution of Employees
Newfoundland: 27
Nova Scotia: 23

Contact Information


EDDY KNOX
Title: General Manager
Area of Responsibility: Management Executive
Telephone: (709) 726-3490
Fax: (709) 726-3729

MARK JEAN
Title: Manager
Area of Responsibility: Management Executive
Telephone: (902) 468-6640
Fax: (902) 468-3312